5 + 2


Water Based Multicolor Decorative Paint

ISONEM MULTI COLOR PAINT is water and acrylic based decorative interior and exterior wall paint that can have two, three or more colors depending on the request and that provides a multicolored granite effect after drying. It is a special paint that contains the desired colors staying as paint in water emulsion (gel). Basically, the paint contains colored particles (pigments) in the form of capsules so they do not mix into each other. Multicolored paint capsules, which do not intermingle in the paint form a multicolored coating after drying. The sizes of the colored particles range from 0.5 mm to several millimeters. In the case, spongeability is desired for interior applications and in exterior applications, it must be protected by ISONEM MS POLYMER transparent waterproofing application. 

ISONEM MULTI COLOR PAINT is completely water-based, nature friendly, VOC free and extremely easy to apply.



  • Water-based, environmentally friendly
  • Multicolored decorative coating
  • It is easy to use. 
  • Dries quickly.



Type : Water-based, acrylic-based, single component
Appearance : Multi-colored, viscous liquid
Density (25°C, g/mL) : 1.00 ± 0.10
Viscosity (25°C, mPa.s) : 1500 – 2500
pH (25 ° C) : 7.5 - 8.5
Solids (% by weight) : 25 ± 2
Flash Point (°C) : Not applicable
Through drying : 1 - 5 hours (depending on the size of the color particles.)

Documents of the ProductDocuments of the Product
Usage AreasUsage Areas
Application TypeApplication Type

Surface Preparation : The application surface must be dry, clean, smooth, stable and free of dust. During application, the air temperature should be between 5 and 30°C.

Application Method : Preferably, ISONEM Multi Color Paint should be applied with a high-volume, low-pressure HVLP spray gun. If you desire to apply by a roller, the surface must be roughened by applying one or two coats of ISONEM SB Super Component product. After the surface has been roughened, apply ISONEM MULTI COLOR PAINT as a single coat with a coral roller without passing over the paint too much.

Thinning/Mixture Ratio : Ready to use, no thinning is required

Paintable (Coverage) Area : Depending on the surface and application method, an area of 2 - 10 m² can be painted with 1 kg of paint Drying Time : Through drying is completed in 4 - 5 hours. (Do not apply below 5 ° C.)

Recommended Application Apparatus : HVLP spray gun or coral roller

Consumption and Suggestions

Packaging : 5 kg plastic bucket
Consumption : 10 - 50 m² Plastic Pail
COLOR : Produced as a mixture of the desired colors.
STORAGE : 24 months in original, unopened package, cool and dry environment.


Share this product: