Magnet Adhesive Plaster
· Interior walls, schools, hospitals, shopping centers, offices, conference rooms, studios
Surface preparation: The application surface must be smooth, firm and free from dust. The application surfaces should be primed with ISONEM D 10 LATEX (200 mL/m²) before application for good adherence. Before the primer application, the dyed surfaces should be made into erose by suitable equipment like a hammer and then primer application is started.
Application method: ISONEM MAGNETIC PLASTER (18 kg) and 6.5 L clean water are mixed homogeneously in a plastic container with a motorized mixer. The mixture is applied to a surface by troweling or spraying. The application is done as one or two layers and ISONEM MAGNETIC PLASTER applied with 1 mm thickness is sleeked and trowelled. If the second layer application will be, ISONEM D 10 LATEX (consumption of 200 mL/m²) application is done for increasing adherence between layers. After these processes, ISONEM WRITE & ERASE VARNISH or any interior paint can be applied. It should be waited for at least 24 hours for the paint application on ISONEM MAGNETIC PLASTER.
If waterbased interior paint application will be done on magnetic plaster, it is suggested ISONEM D 10 LATEX (consumption of 200 mL/m²) for the purpose of increase adherence of paint to the plastered surface.
CONSUMPTION: 1 - 2 kg/m²
PACKING: 5 kg, 10 kg and 18 kg PP bucket,
PAINTABLE (COVERAGE) AREA:
5 kg: 2,5 - 5 m² /bucket,
10 kg: 5 - 10 m² / bucket,
18 kg: 9 - 18 m²/bucket
SHELF LIFE: 24 months from date of production if stored in original, unopened, undamaged packages.
STORAGE CONDITIONS: Store tightly closed in a dry and cool place.