DIAMOND STONE

pdf

ISONEM DIAMOND STONE is a special paint that gives a grainy, textured and decorative appearance with its acrylic-based aggregate particles, vibrant, bright, water-based, flexible and also has excellent waterproofing properties. It can be used on exterior and interior surfaces such as cement plastered, concrete, brick. The product has excellent resistance to UV and weather conditions. It has high covering power and covers surface defects. It has crack bridging feature, breathes, does not swell and spill, and the desired pattern can be given with a roller. It is harmless to health and the environment.

FEATURES

- Thanks to its flexible structure, it does not crack, soften, swell, or spill.
- It is odorless and environmentally friendly, does not contain VOCs and solvents.
- It has excellent UV resistance.
- Provides a decorative appearance with vivid and bright colors.
- It has excellent adhesion, spreading and high covering power.
- Desired patterns can be given, protective and decorative long-lasting.

Technical Specifications

Density (25°C, g/mL) : 1,40 ± 0,10
pH (25°C) : 7.0 – 9.0
Viscosity (25°C, mPa.s) : 9000 - 12000
Solid content (% Weight) : 74 ± 2
Water transmission rate (kg/ m2. h0,5) : < 0,1 CLASS W3
Adhesion strength by pull-off test (N/mm2) : Crack bridging flexible systems without trafficking ≥ 0.8, with trafficking 1.5 N/mm²
Permeability to water vapour (m) : 5 ≤  SD ≤ 50 CLASS II
Solvent : Water
Documents of the ProductDocuments of the Product

It is used as a grainy bright decorative paint on the exterior and interior facades of the buildings, all kinds of walls, concrete, brick, briquette, aerated concrete, plaster, etc.

Surface preparation: The surface must be firm, clean and dry. All surfaces should be cleaned from oil, dirt and all kinds of residues before application. Before application, the surfaces should be primed with ISONEM UNIVERSAL PRIMER (diluted 1: 7 with water - 1 Part Primer, 7 Parts Water). The primer is then left to dry for 4 hours.

Application method: ISONEM DIAMOND STONE is ready to use. Before the application, the paint is mixed homogeneously with the help of a mixer for 5 minutes in the bucket. It should be used undiluted. It should be applied on the primed surface in two layers with a roller. A coral roller can be used for a thick pattern and a post roller for a thin pattern. You should wait at least 4 hours between coats.

Color: All requested can be produced in colors

Consumption: 0,45 - 1,0 kg/m² (It may vary depending on the colors, the properties of the application surface and the pattern roll to be applied.) 

Paintable (Coverage) Area: 10 kg: 10 - 22 m²/bucket, 18 kg: 18 - 40 m²/bucket

Packaging: 10 kg and 18 kg PP in buckets

Shelf Life : 24 months from date of production if stored in original, unopened, undamaged packages.

Storage Condition : Store tightly closed in a dry and cool place

...
ISONEM DIAMOND STONE Application Photos ISONEM DIAMOND STONE Application Photos ISONEM DIAMOND STONE Application Photos ISONEM DIAMOND STONE Application Photos
Share this product:
x