3 + 1


Super Adhesive

This is a liquid product, which is added into mortar or applied onto the surface for the applications such as ceramic works or the insulations based on concrete, plaster, alum, cement, provides the mortar with the adhesion, flexibility and the feature increasing the adherence. It offers an excellent adherence and retaining feature for the old material or the new one to be applied on by forming a super adhesive layer. In respect of concrete, plater, alum, applications, it prevents the formation of cold joint filler. It is available to use on the moist or the dry surfaces. The product can be used as the undercoating layer on very absorbent surfaces. When ISONEM D10 LATEX is used as the undercoating layer on the surface before the insulation, it increases the mechanical resistance. Therefore the insulation materials can give a better adhesion to the surface. It ensures an easy application of the mortar by plastifying mortars. It prevents quick drying by increasing the water retaining capacity of the mortar. It prevents the shrinkage cracks. It increases the abrasion resistance of the mortar and dusting in alum applications. The product is ideal to increase the freezing and dissolving resistance as well as to improve the resitance against the chemicals. It recudes the oil and solvent permeability.


Documents of the ProductDocuments of the Product
Usage AreasUsage Areas
    • • Any kind of cement mortars
    • • Plasters
    • • Mortar of faience, ceramic adhesives
    • • Repair adhesives, cold joint fillers
    • • Places where the adherence requied in scope of concerte repair works
    • • Sprinkling pratices before plastering
    • • As the undercoating layer before insulation applications
Application TypeApplication Type
The surfaces should be moist. Moisturizing should be done until the surface saturated completely. All surfaces should be clean and free of any particles and dust. The layers that recude the adherence such as the oil, dust, paint, cement, rust and salt traces should be cleaned thorougly.
ISONEM D10 LATEX is applied onto the surface without any thickening process in a thickness of 200 ml/m2 by means of a brush. After applied immediately, the mortar or the adhesive is applied on the product within 30-40 minutes latest when it is wet. For the concrete and mortar contribution. It should be used by adding into the mortar water in rate of 1 kg/m3 in one cube meter concrete or the mortar production. Approximately 1 kg of ISONEM D 10 LATEX is added into one bag (25 kg) of ISONEM M 03 elastic motars then the water (4 liter) is added sufficiently.
Consumption and Suggestions

PACKAGE: 5 lt PE barrel

CONSUMPTION: 200 ml/m2 adherence, 1 kg/m3 for the mortar additives

STORAGE CONDITIONS/SHELF LIFE: 24 months from date of production if stored properly in unopened and undamaged original sealed containers at temperatures between +5°C to +35°C at dry conditions. Protect from excessive temperature and frost.

Share this product: