ISONEM MULTICOLOR PAINT
I NEED MORE INFORMATION
3 + 4

ISONEM MULTICOLOR PAINT

Water Based Multicolor Decorative Paint

 

ISONEM MULTI COLOR PAINT is a water and acrylic based decorative interior and exterior wall paint that can have two, three or more colors depending on the request and that provides a multicolored granite effect after drying. It is a special paint that contains the desired colors staying as paint in water emulsion (gel). Basically, the colored particles (pigments) are contained in the paint in capsules so that they do not mix into each other. Multicolored paint capsules, which do not intermingle in the paint form a multicolored coating after drying. The sizes of the colored particles range from 0.5 mm to several millimeters. In the case spongeability is desired for interior applications and in exterior applications, it must be protected by ISONEM MS POLYMER transparent waterproofing application.

ISONEM MULTI COLOR PAINT is completely water-based, nature friendly, VOC free and extremely easy to apply.

 

FEATURES / ADVANTAGES:

  • Water-based, nature friendly
  • Multicolored decorative coating
  • Easy to use
  • Dries fast

 

TECHNICAL SPECIFICATIONS:

Appearance: Multicolored, jell-like viscous liquid

Chemical structure: Water-based, acrylic-based, multicolored decorative paint

Density (25°C, g/mL): 1.00 ± 0.10                            

Viscosity (25°C, mPa.s) : 1500 - 2500

pH (25°C): 7.5 – 8.5

Solid (% by weight): 25 ± 2

Flash point (°C) : NA

Dry time: 1 – 5 hours (varies depending on the size of color particles)

 

 

 

 

 

 

 

Documents of the ProductDocuments of the Product
Usage AreasUsage Areas
Application TypeApplication Type

HOW TO APPLY

Surface Preparation

The surface to be applied must be dry, clean, smooth, stable and free of dust. The surface temperature and ambient temperature must be between +5°C and +30°C during application

 

Application Method

Preferably, apply Isonem Multi Color Paint with a high-volume, low-pressure HVLP spray gun. If you desire to apply by a roller, the surface must be roughened by applying one or two coats of ISONEM SB Super Component product. After the surface has been roughened, apply ISONEM MULTI COLOR PAINT as a single coat with a coral roller without passing over the paint too much.

Consumption and Suggestions

WARNING: During and after the application, protect from external factors such as rain, water, mechanical impacts, etc. for 24 hours.

 

Thinning / Mixture Ratio   : Ready to use, no thinning is required

Paintable (Coverage) Area : Depending on the surface and application method, an area of 2-10 m² can be painted with 1 kg. of paint

Drying Time : Hard dry is completed in 4 – 5 hours (Do not apply under 5°C)

Recommended application tools   : HVLP spray gun or coral roller

Cleaning of tools : Clean all tools with water immediately after use

Packaging : 5 kg plastic bucket

COLOR: Produced as a mixture of the desired colors

STORAGE  : 24 months in the original, unopened package in a cool and dry environment.
 

Notes: All technical information given in this Product Data Sheet is based on laboratory tests. Actual values may vary due to circumstances beyond our control

 

Health and Safety Information: Users should refer to the material safety data sheet (MSDS) of the product for information and recommendations on the safe transport, storage and disposal of chemical products, including physical, ecological, toxicological and other safety related information.

 
Share this product: