ISONEM SS SOIL HARDENER
Soil Stabilizer And Dust Control Agent
ISONEM Soil Stabilizer is an ecologic agent used to stabilize and solidify any soil or aggregate as well as dust suppression. Once applied to the soil or aggregate, the copolymer molecules coalesce forming bonds between the soil or aggregate particles, originates with its long, nanoparticle molecular structure that link and cross-link together. As the water dissipates from the soil or aggregate, a durable and water resistant matrix of flexible solid-mass is created. Once cured, it becomes completely transparent, leaving the natural landscape to appear untouched.
- Chemical Composition: Polyvinyl acetate copolymer emulsion
- Appearance: White emulsion
- Ph: 4-6 •Total
- Solids: % 50 ±1.0
- Viscosity (25°C, Br.): Min 500 cps
- Mechanical Stability: Excellent
- Unpaved dirt roads.
- Construction sites and roads.
- Heavy haul roads.
- Road base and sub-base.
- Storage and stock piles.
- Power plants.
- Airport infields.
- Mine tailings and areas.
- Land development.
- Construction parking areas.
- Event parking lots.
- Road shoulders.
- Slopes and berms.
- Foresty roads.
- Agricultural roads.
- Border patrol roads.
- Golf courts and trails.
- Parks and recreations.
- Storage lots and ponds.
ISONEM Soil Strengthener is a consentrated ready to use solution. Application area should be completely dry and free from water. The area must be free from rain for a minimum of 72 hours after the application. Temperature must be at least 4°C. Compact the test plot to a minimum of 95%. pre-wet the test plot with water (only) at a rate of 2,5 L/m2 to break the surface tension and increase penetration depth. Solution should be sprayed to surface slowly and uniformly.
- Unpaved dirt roads with high traffic: 1 lt ISONEM SS + 6 liters water
- Dust control: 1 lt ISONEM SS +10 liters water
- Aircraft runways (heavy traffic) and construction areas: 1 lt ISONEM SS + 4 liters water
PERFORMANCE FACTORS; Application rate, soil type, dilution, compaction, traffic, penetration, climate & others
PACKAGE: 5,10, 20, lt PE Barrel
COLOR: Milky White (transparent once cured), it can be colored if required. PM10 & PM2.5 Compliant (stops hazardous dust particles of 2.5+ microns in size)
- Non-Flammable & Non-Volatile
- Ecologically & Environmentally Safe
STORAGE CONDITIONS/SHELF LIFE: 24 months from date of production if stored properly in unopened and undamaged original sealed containers at temperatures between +5°C to +35°C at dry conditions. Protect from excessive temperature and frost.