ISONEM METALLIC FLOOR
ISONEM METALLIC FLOOR is a low-viscosity, solvent-free, self-spreading, multi-purpose indoor flooring material that provides a unique decorative appearance thanks to its two components, reflective pigments and aesthetic effects. Its application is easy, it provides a shiny metal-like surface, and it is impermeable and hygienic, and easy to clean. It is resistant to mechanical loads, abrasion and chemicals. It is suitable for all interior surfaces such as all kinds of concrete, ceramic, marble, mosaic, wood, steel, glass, etc.
• It is decorative and provides a shiny surface
• Resistant to friction, impact and abrasion
• Easy and practical to clean.
• Quick and easy to apply
• Maintenance is easy.
• High adhesion.
• Solvent free.
• Excellent penetration capability.
•Product Structure: Double component, Component A is liquid metal-like resin based. Component B is the hardener.
• Color: Metallic Floor Color Chart.
• Density (mixture): 1.08 gr/ml + 0.05
• Viscosity (Mixture): 900 cp (25 °C)
• Touch-Dry Time (20°C): 8-10 hours
• Through-dry time (20°C): 3 days
• Mixture Life (25 °C): 40 – 50 minutes
• Mixing Ratio: 3.2/1.8 (by weight)
- ONLY SUITABLE FOR INTERIOR USE.
- In the showrooms,
- Common areas in the shopping malls, stores
- To all kinds of ceramic, concrete, marble, mosaic, wood, steel surfaces,
- Labs, food, chemicals and pharmaceutical industries,
Surface Preparation: The surfaces to be applied must be purified from any kind of dirt, oil, dust and surface waste and it must be dry and clean.
UNDERCOAT APPLICATION: Before applying ISONEM METALLIC FLOOR, all surfaces must be undercoated with ISONEM EP PRIMER (Epoxy based primer) with a consumption of 0.3 – 0.350 kg/m2.
PREPARATION OF THE MIXTURE: ISONEM METALLIC FLOOR is supplied in ready-to-use sets prepared according to the mixture ratios. It is required to prepare a mixture that will be enough for the surfaces to be applied by considering the mixture life. Make sure that the temperatures of the materials are between +15 - +25°C before starting to mix. Mix Component A thoroughly with a mechanical mixer at 300 - 400 rpm for 3 - 4 minutes without dragging air in it. Then, pour the entire component B into the component A and make sure that no material is left in component B. Mix A+B until you obtain a homogeneous mixture for minimum 3 minutes and consume the prepared mixture within 40-50 minutes.
APPLICATION: Apply the mixture to the prepared surface in one coat with a roller or brush. If a thickness is desired, the second coat should be applied after 8-10 hours, when the first coat dries. Always apply in the same direction. Hard drying time is about 18-24 hours. Full hardening and physical/chemical resistance state take 7 days
CONSUMPTION: 0,6-1,0 kg/m2
STORAGE: 24 months in the unopened original package in a dry and cool environment.
PACKAGING: 5 kg set (Component A: 3.2 kg, Component B: 1.8 kg) Notes: Technical information given in this product information datasheet is based on the laboratory tests. The actual values may vary due to the conditions beyond our control.
Health and Safety Information: Users should refer to the material safety data sheet (MSDS) of the product that contains physical, ecological, toxicological and other safety related information for information and recommendations on the safe handling, storage and disposal of chemical products.