5 + 1


Two-Component Solvent Free Epoxy Resin Based Primer

ISONEM EP is a two-component solvent free epoxy resin based primer with high chemical resistance and approved for use in contact with potable (drinking) water.


  • Excellent decontaminability.
  • Hygienic.
  • Non-taint.
  • High film thickness.
  • Solvent free.
  • Excellent chemical resistance.
  • Good abrasion resistance.
  • Durable.
  • Sprayable.
  • Damp tolerant (no vapour pressure).
  • Vapour proof.
  • Suitable for drinking water contact.
VOLUME SOLIDS: Approx 100%
POT LIFE: +10° +20°C +30°C   60 mins 50 mins 40 mins
Documents of the ProductDocuments of the Product
Usage AreasUsage Areas
  • On steel or concrete.
  • Reservoir coatings.
  • Bund linings.
  • Food production areas.
  • Cleanroom floors and walls.
  • Pipe linings.
  • Metal tank coating and lining.
  • Nuclear industries.
  • Aquariums.
  • Process areas
Application TypeApplication Type
The surfaces must be dry and free of all contaminants eg oils, grease, surface treatments and coatings etc. The substrate must be prepared mechanically to achieve an open textured fine gripping surface, free of cement laitance. Weak concrete should be removed and surface defects such as blowholes and voids must be fully exposed.
All dust, loose and friable material must be completely removed from all surfaces before application of the coating preferably by brush and vacuum. Repairs to cementitious substrate and filling of blowholes levelling of irregularities etc should be carried out using ISONEM M03 Repair Mortar.
MIXING: Mix both components thoroughly with a low speed electric stirrer (300-600 rpm) for a minimum of 3 minutes until a uniform mix has been achieved. Leave material to stand in container until the majority of air bubbles have dispersed.
APPLICATION: Apply by brush, roller or airless spray.
CLEANING EQUIPMENT: Hardened material may have to be mechanically removed.
Consumption and Suggestions

A Component (Resin): 3,1 kg + B Component (Hardener): 1,9 kg
TOTAL: 5 kg set.
CONSUMPTION: Approx 0.3 - 0.4 kg/m²
STORAGE CONDITIONS/SHELF LIFE: 24 months from date of production if stored properly in unopened and undamaged original sealed containers at temperatures between +5°C to +35°C at dry conditions. Protect from excessive temperature and frost.

Share this product: