MS FLOOR

ISONEM MS FLOOR, is an extremely durable floor coating with strong adherence and UV resistance. ISONEM MS FLOOR, which is water-based and one-component, can be produced in any color, and it is extremely easy to work with its fast drying feature and application that does not require a primer. With its strong structure that is not affected by human and vehicle traffic, it is extremely suitable for use on walkways, floors that will be exposed to vehicle traffic, and asphalt pavements. It is used to obtain a dust-free, decorative surface on asphalt, concrete and cement surfaces indoors and outdoors.

TECHNICAL SPECIFICATIONS

Density (25°C, g/mL): 1,45 ± 0,10

pH (25°C): 7.0 – 9.0

Viscosity (25°C, mPa.s): 7000 ± 2000

Water transmission rate (kg/ m². h^0,5): < 0,1 CLASS W₃

Adhesion strength by pull-off test (N/mm²): Rigid system without traffic load ≥ 1.0 N/mm², with traffic load 2.0 N/mm²

Permeability to water vapour (m): 5 ≤ SD ≤ 50 CLASS II

Solvent:Water

Documents of the Product

TDS (EN) - ISONEM MS FLOOR

· Garages and light traffic exposed to parking areas
· Walking paths, garden floors,
· On concrete or asphalt roads, parking areas,
· Game and entertainment areas

Surface preparation: The surfaces to be applied should be free from all kinds of oil, dirt, dust and surface wastes and should be completely dry and clean. In order to clean the application surfaces, they should be washed with water and waited for drying. The areas to be repaired, if any, on the surface should be repaired with ISONEM MS MORTAR at a maximum thickness of 5 mm at once. It does not require the use of primer.

Application Method: ISONEM MS FLOOR is ready to use. It is mixed homogeneously in the bucket for 5 minutes with the help of a mixer, and then it can be applied in two layers with a brush, roller or a suitable sprayer, waiting for 1 hour between layers. In the application with a sprayer, homogeneous distribution and penetration of the application on the surface is provided with the help of a brush or roller immediately after the application.

PACKING: 5 kg, 10 kg and 18 kg in PP buckets

CONSUMPTION: 1 kg/m² (two/three layers application)

5 kg: min. 5 m²/bucket (two layers application)

10 kg: min. 10 m²/bucket (two layers application)

18 kg: min. 18 m²/bucket (two layers application)

COLOR: All requested can be produced in colors.

SHELF LIFE: 24 months from date of production if stored in original, unopened, undamaged packages.

STORAGE CONDITIONS: Store tightly closed in a dry and cool place.

...